Name: TP-Link CPE220 Access Point
Brand: TP-Link
SKU: NEXUS-10644

TP-Link CPE220 Access Point

Price on Call

Available on Request

Enhance your outdoor network with the TP-Link CPE220. Brand: TP-Link Model: CPE220 Type: 2.4GHz 300Mbps 12dBi Outdoor CPE Processor: Qualcomm Atheros 560MHz CPU, MIPS 24Kc Frequency Range: 2.4~2.483GHz Power: 30dBm/1000mW (Adjustable power by 1dBm) Boost

TP-Link CPE220 Access Point:

Product Overview:

Built-in 12dBi 2x2 dual-polarized directional MIMO antenna

Adjustable transmission power from 0 to 30dBm/1000mw

System-level optimizations for more than 13km long range wireless transmission

TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications

Centralized Management System – Pharos Control

AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes

Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely

Product Specifications:

Category	Feature	Details
HARDWARE FEATURES	Processor	Qualcomm Atheros 560MHz CPU, MIPS 24Kc
	Memory	64MB DDR2 RAM, 8MB Flash
	Interface	1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE in), 1 10/100Mbps Shielded Ethernet Port (LAN1), 1 Grounding Terminal, 1 Reset Button
	Power Supply	Passive Power over Ethernet via LAN0 (+4, 5pins; -7, 8pins), Voltage range: 16-27VDC
	Power Consumption	10.8 Watts Max (Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.)
	Dimensions (W x D x H)	11×3.1×2.1 inch (276×79×60 mm)
	Antenna Type	Built-in 12dBi 2×2 Dual-polarized Directional Antenna, Beam Width: 60° (H-Plane) / 30° (E-Plane) (Note: For more details, please refer to datasheet)
	Protection	15KV ESD Protection, 6KV Lightning Protection
	Enclosure	Outdoor ASA stabilized plastic material, IPX5 waterproof Certification
WIRELESS FEATURES	Wireless Standards	IEEE 802.11b/g/n (with Pharos MAXtream disabled)
	Proprietary Protocol	TDMA Mode (with Pharos MAXtream enabled)
	Wireless Speeds	Up to 300Mbps (40MHz, Dynamic), Up to 144.4Mbps (20MHz, Dynamic), Up to 72.2Mbps (10MHz, Dynamic), Up to 36.1Mbps (5MHz, Dynamic)
	Frequency	2.4~2.483GHz (Note: Available operating frequency may vary depending on the limitations of the countries or regions in which the device is used.)
	Transmission Power	30dBm/1000mw (Adjustable power by 1dBm) (Note: Maximum transmission power may vary across different channels depending on the limitations of the countries or regions in which the device is used.)
SOFTWARE FEATURES	Wireless Configurations	Pharos MAXtream TDMA Technology, 802.11b/g/n Modes, Selectable Channel Width: 5/10/20/40MHz, Automatic Channel Selection, Transmission Power Control, Dynamic Frequency Selection (DFS), WDS Enable/Disable, Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption, SSID Broadcast Enable/Disable, Multi-SSID with VLAN Tagging (AP mode only), Distance/ACK Timeout Setting, Wireless MAC Address Filter, Wireless Advanced: > Beacon Interval/RTS Threshold/Fragmentation Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
	Management	Discovery and Remote Management via Pharos Control application, HTTP/HTTPS Web-based management, System Log, SNMP Agent (v2c), Ping Watch Dog, Dynamic DDNS, SSH Server
	System Tools	Wireless Signal Quality Indicators: Signal Strength/Noise/Transmit CCQ/CPU/Memory, Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP, Spectrum Analyzer, Speed Test, Ping, Traceroute
	System-level Optimizations	Optimized IGMP Snooping/Proxy for multicast applications, Hardware watch dog
POE ADAPTER FEATURES	Dimensions (W x D x H)	85.8×43.9×31.9 mm
	Interfaces	1 AC Jack with Earth Ground, 1 10/100/1000Mbps Shielded Ethernet Port (Power + Data), 1 10/100/1000Mbps Shielded Ethernet Port (Data)
	Button	Remote Reset Button
	Power Status LEDs	Green
	Input	100-240VAC, 50/60Hz
	Output	24VDC, 0.5A Max (+4, 5pins; -7, 8pins. Support up to 60m Power over Ethernet)
	Efficiency	>80%
	Certifications	CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
OTHERS	Certification	CE, FCC, RoHS, IPX5
	Package Contents	Outdoor Wireless CPE, 24V 0.5A Passive PoE Adapter, Pole Mounting Straps, AC Power Cord, Installation Guide
	System Requirements	Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux. (Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.)
	Environment	Operating Temperature: -40℃~70℃ (-40℉~158℉), Storage Temperature: -40℃~70℃ (-40℉~158℉), Operating Humidity: 10%~90% non-condensing, Storage Humidity: 5%~95% non-condensing

Request a Quote for TP-Link CPE220 Access Point: – Contact Us for Queries and Assistance

If you have any queries or require further assistance regarding our network accessories or any other products and services, we are here to help. We offer multiple ways to get in touch and make it convenient for you to reach out to us.

Request a Quote:

If you need a customized solution or want pricing information for specific products, we encourage you to use our Request a Quote form. Simply fill in the necessary details, including your contact information and specific requirements, and our team will get back to you promptly with the information you need. Visit “GET A QUOTE” to access the form and submit your request

Contact Us for Queries and Assistance

We are here to assist you! If you have any questions or need further information about our network accessories or any other products and services, please feel free to reach out to us using any of the following methods:

Phone: Call us at +92318-0111902. Email: Send us an email at ops@Nexus Technology.com. Live Chat: Visit our website and use the live chat feature for instant assistance. WhatsApp: Message us directly on WhatsApp at +92 321 8283360.